Differences

This shows you the differences between two versions of the page.

--- v1_1 [2015/10/22 12:15] – [Turbo RPM Curve] hakcenter
+++ v1_1 [2016/05/07 21:49] – hakcenter
@@ Line 6: / Line 6: @@
 | {{:v1.1:smd:layout.png?direct&400|}} | {{:v1.1:th:layout.png?direct&400|}} |
 ===== Pin Out =====
-^ {{:v1.1:header_connector.png?nolink|}} ^^^
+^ {{:v1.1:header_connector.png?nolink|}} ^^^^
-^ **HEADER Pin #** ^ **Description** ^ **Schematic Net Name** ^
+^ **HEADER Pin #** ^ **Description** ^ **Schematic Net Name** ^ **Wire Color** ^
-^ Main Power ^^^
+^ Main Power ^^^^
-| 8 | POWER | **<fc #ff0000>+12V</fc>** |
+| 8 | POWER | **<fc #ff0000>+12V</fc>** | Red |
-| 16 | GROUND | **GND** |
+| 16 | GROUND | **GND** | Black |
-^ VR Sensor ^^^
+^ VR Sensor ^^^^
-| 4 | VR+ ||
+| 4 | VR+ || Green/White |
-| 5 | VR- ||
+| 5 | VR- || Green/White |
-^ Digital I/O Inputs ^^^
+^ Digital I/O Inputs ^^^^
-| 2 | Spare | S_IO |
+| 2 | Spare | S_IO | Orange |
-| 3 | Performance | P_IO |
+| 3 | Performance | P_IO | Orange |
-| 10 | Brake | B_IO |
+| 10 | Brake | B_IO | Orange |
-| 11 | Cruise | C_IO |
+| 11 | Cruise | C_IO | Orange |
-^ ADC I/O ^^^
+^ ADC I/O ^^^^
-| 12 | ADC2 ||
+| 12 | ADC2 || Blue |
-| 13 | ADC1 ||
+| 13 | ADC1 || Blue |
-| 14 | ADC0 ||
+| 14 | ADC0 || Blue |
-| 7 | GROUND | **GND** |
+| 7 | GROUND | **GND** | Black |
-| 15 | POWER | **<fc #ff0000>+5V</fc>** |
+| 15 | POWER | **<fc #ff0000>+5V</fc>** | Red/Blue |
-^ CAN Bus ^^^
+^ CAN Bus ^^^^
-| 1 | CAN Low | CANL |
+| 1 | CAN Low | CANL | Yellow |
-| 9 | CAN High | CANH |
+| 9 | CAN High | CANH | Yellow/White |
-^ SPARE ^^^
+^ SPARE ^^^^
-| 6 | GROUND | **GND** |
+| 6 | GROUND | **GND** ||
 ===== Turbo RPM Curve =====
 {{:v1.1:turbo_curve.png?nolink&300 |}}
@@ Line 39: / Line 39: @@
 ----
 ===== Performance Selection =====
-{{:v1.1:perf_selection.png?nolink |}}
+{{:v1.1:perf_selection.png?nolink&300 |}}
 Selecting the performance option is simple, just move the jumpers in to the corresponding pins for the desired selection.