v1_1
This is an old revision of the document!
Table of Contents
Shield Revision v1.1
Overview
HEADER pin outs have changed substantially between v1.0 and v1.1, make note of the new pin out.
Layouts
Pin Out
HEADER Pin # | Description | Schematic Net Name | Wire Color |
---|---|---|---|
Main Power | |||
8 | POWER | +12V | Red |
16 | GROUND | GND | Black |
VR Sensor | |||
4 | VR+ | Green/White | |
5 | VR- | Green/White | |
Digital I/O Inputs | |||
2 | Spare | S_IO | Orange |
3 | Performance | P_IO | Orange |
10 | Brake | B_IO | Orange |
11 | Cruise | C_IO | Orange |
ADC I/O | |||
12 | ADC2 | Blue | |
13 | ADC1 | Blue | |
14 | ADC0 | Blue | |
7 | GROUND | GND | Black |
15 | POWER | +5V | Red/Blue |
CAN Bus | |||
1 | CAN Low | CANL | Yellow |
9 | CAN High | CANH | Yellow/White |
SPARE | |||
6 | GROUND | GND |
Turbo RPM Curve
Selecting RPM curves is simple, just move the jumpers in to the corresponding pins for curve selection.
Curve 1 is the least aggressive curve.
Curve 4 is the most aggressive curve.
Performance Selection
Selecting the performance option is simple, just move the jumpers in to the corresponding pins for the desired selection.
Perf 1 is the default option.
Perf 2 is the more aggressive performance option.
Bill of Materials
v1_1.1477341669.txt.gz · Last modified: 2016/10/24 15:41 by hakcenter