Action disabled: source
v1_1
Table of Contents
Shield Revision v1.1
Overview
HEADER pin outs have changed substantially between v1.0 and v1.1, make note of the new pin out.
Layouts
Pin Out
HEADER Pin # | Description | Schematic Net Name | Wire Color |
---|---|---|---|
Main Power | |||
8 | POWER IN | +12V | Red |
16 | GROUND | GND | Black |
VR Sensor | |||
4 | VR+ | Green/White | |
5 | VR- | Green/White | |
Digital I/O Inputs | |||
2 | Spare | S_IO | Orange |
3 | Performance | P_IO | Orange |
10 | Brake | B_IO | Orange |
11 | Cruise | C_IO | Orange |
ADC I/O | |||
12 | ADC2 | Blue | |
13 | ADC1 | Blue | |
14 | ADC0 | Blue | |
7 | GROUND | GND | Black |
15 | POWER OUT | +5V | Red/Blue |
CAN Bus | |||
1 | CAN Low | CANL | Yellow |
9 | CAN High | CANH | Yellow/White |
SPARE | |||
6 | GROUND | GND |
Turbo RPM Curve
Selecting RPM curves is simple, just move the jumpers in to the corresponding pins for curve selection.
Curve 1 is the least aggressive curve.
Curve 4 is the most aggressive curve.
Performance Selection
Selecting the performance option is simple, just move the jumpers in to the corresponding pins for the desired selection.
Perf 1 is the default option.
Perf 2 is the more aggressive performance option.
Bill of Materials
v1_1.txt · Last modified: 2019/06/06 17:44 by hakcenter